Concavity Relative approximate concavity analysis for surface meshes | |

Viewshed Viewshed analysis for surface mesh faces. | |

CutFill Calculate cut and fill volumes from proposed and existing mehes. | |

Watershed Calculate the watershed for given points on a surface mesh. | |

Shade Shading analysis for surface mesh faces. | |

Slope Slope analysis for surface meshes. | |

Flow Flow tracing for surface mehes. | |

Elev Elevation analysis for surface meshes | |

Aspect Slope aspect analysis for surface meshes. | |

Roughness Relative roughness analysis for surface meshes |

Slope Point Calculate local slope percentage for a point on a mesh | |

Slope Path Calculate local slope percentage for points along a curve on a mesh | |

Slope Line Calculate slope percentage for the end points of curves | |

Contour Draws major and minor contours with elevation tags | |

Spot Elevation Draw elevation tags for points projected to a mesh | |

Spot Elevation Point Draw elevation tags for points | |

Spot Elevation Path Draw elevation tags for a points along a curve on a mesh | |

Spot Elevation Grid Draw elevation tags for a point grid on a mesh | |

Slope Grid Calculate local slope percentage for a point grid on a mesh | |

HP LP Calculate local high and low points on a surface mesh |

Reduce Slope Reduce mesh slopes to given limit | |

Mesh Curve Pull Edit mesh with deformations following curves, strength defined by curve elevation | |

Mesh Point Pull Edit mesh with deformations at points, strength defined by point elevation | |

Mesh Curve Edit mesh with an edge curve with a given slope | |

Mesh Flat Edit mesh with a flat region defined by a curve | |

Mesh Point Edit mesh with points and a given slope | |

Mesh Path Edit mesh with a flattened path along a given curve |

Triangulate Mesh Create a surface mesh from points and/or curves | |

Remesh Random Resample a landscape mesh with a random grid | |

Remesh Square Resample a landscape mesh with a square grid | |

Remesh Triangular Resample a landscap emesh with a triangular grid |

Section Serial Dist Cuts serial sections pependicular to a centerline curve at a given distances along curve | |

Section Serial Cuts serial sections pependicular to a centerline curve at a given interval | |

Section To XY Cuts serial sections pependicular to a centerline curve at a given interval | |

Section Profile Cuts a section along an irregular profile curve. |

Import Mesh LandXML Import mesh from a LandXML TIN surface | |

Import Mesh DEM Import mesh from a Tiff DEM file encoded in single-channel 32 bit floats |

Bison About Bison |

Site design © Robin Rodricks.
Co-created by Andrew Heumann.
Bison and associated data © 2023 bison.la.

Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.
Hosted by GitHub