We need your help! 🔥
Please consider disabling your ad-blocker to support this website! 🔑
We are a free, community-supported website! 🥰
We only display small unobtrusive ads which help us stay online! 💯
Thank you in advance! ❤️
We are a free, community-supported website! 🥰
We only display small unobtrusive ads which help us stay online! 💯
Thank you in advance! ❤️
Mega Write
This component will write values to all corresponding digital
pins on an Arduino Mega board. Note: This component is
meant to be used in tandem with the Firefly Firmata Arduino
Sketch which can be downloaded from the Firefly website
at: http://www.fireflyexperiments.com.
Inputs
| Name | ID | Description | Type |
|---|---|---|---|
| Start Writing Values | Start | Input an Boolean value (True/False) to start writing values to the Arduino | Boolean |
| Digital Pin 2~ | DPin2~ | Integer to write to Digital Pin 2. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 3~ | DPin3~ | Integer to write to Digital Pin 3. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 4~ | DPin4~ | Integer to write to Digital Pin 4. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 5~ | DPin5~ | Integer to write to Digital Pin 5. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 6~ | DPin6~ | Integer to write to Digital Pin 6. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 7~ | DPin7~ | Integer to write to Digital Pin 7. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 8~ | DPin8~ | Integer to write to Digital Pin 8. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 9~ | DPin9~ | Integer to write to Digital Pin 9. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 10~ | DPin10~ | Integer to write to Digital Pin 10. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 11~ | DPin11~ | Integer to write to Digital Pin 11. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 12~ | DPin12~ | Integer to write to Digital Pin 12. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 13~ | DPin13~ | Integer to write to Digital Pin 13. Right-click on the input to set the input status (Digital, PWM, Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the PWM status is set then any value between 0-255 can be used to analogWrite to the specified pin. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 32 | DPin32 | Integer to write to Digital Pin 32. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 33 | DPin33 | Integer to write to Digital Pin 33. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 34 | DPin34 | Integer to write to Digital Pin 34. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 35 | DPin35 | Integer to write to Digital Pin 35. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 36 | DPin36 | Integer to write to Digital Pin 36. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 37 | DPin37 | Integer to write to Digital Pin 37. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 38 | DPin38 | Integer to write to Digital Pin 38. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 39 | DPin39 | Integer to write to Digital Pin 39. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 40 | DPin40 | Integer to write to Digital Pin 40. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 41 | DPin41 | Integer to write to Digital Pin 41. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 42 | DPin42 | Integer to write to Digital Pin 42. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 43 | DPin43 | Integer to write to Digital Pin 43. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 44 | DPin44 | Integer to write to Digital Pin 44. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 45 | DPin45 | Integer to write to Digital Pin 45. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 46 | DPin46 | Integer to write to Digital Pin 46. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 47 | DPin47 | Integer to write to Digital Pin 47. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 48 | DPin48 | Integer to write to Digital Pin 48. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 49 | DPin49 | Integer to write to Digital Pin 49. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 50 | DPin50 | Integer to write to Digital Pin 50. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 51 | DPin51 | Integer to write to Digital Pin 51. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 52 | DPin52 | Integer to write to Digital Pin 52. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| Digital Pin 53 | DPin53 | Integer to write to Digital Pin 53. Right-click on the input to set the input status (Digital or Servo). If the Digital status is set then the integer (0) will send a LOW value and a (1) will send a HIGH value. If the Servo status is set then any value between 0-180 can be used to for servo positioning. | Integer |
| PortNumber | Port | The Port Number has to be the same Serial Port assigned in the Arduino Sketch. You can find which COM port you are using by clicking on the Tools>Serial Port button on the Arduino IDE. | Integer |
Outputs
| Name | ID | Description | Type |
|---|---|---|---|
| Arduino Output | Out | Returns the string that will be sent to the Arduino board. The Arduino sketch that accompanies this component will split this string up and send the values to the appropriate pins. | Text |
| Status Message | Msg | Current status of Serial Port | Text |
Site design © Robin Rodricks.
Firefly and associated data © 2024 Andrew Payne (LIFT architects).
Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.
Hosted by GitHub