Grasshopper Docs

Community documentation for Grasshopper add-ons & plugins

0 | Ladybug
1 | AnalyzeWeatherData
2 | VisualizeWeatherData
3 | EnvironmentalAnalysis
4 | Renewables
5 | Extra
6 | Developers
7 | WIP

Select surfaces based on orientation.

Inputs

NameIDDescriptionType
Geometry_geometryGeometry for which facades will be selected. Geometry must be either a Brep, a Mesh or a list of Breps or Meshes.Goo
Max Up Dec Angle_maxUpDecAngle_Maximum normal declination angle from ZAxis that should be still considerd upGoo
Max Down Dec Angle_maxDownDecAngle_Maximum normal declination angle from ZAxis that should be still considerd downGoo
Orientation_orientation_A number between 0 and 8 for desired orientation. 0 = North, 1 = NE, 2 = East, ... 7 = NW, 8 = Roof. Default is South.Goo
Plus Deg_plusDeg_Angle in degrees for deviation from _orientation. Default = 23. For selecting all vertical orientations give 359 for this input and 0 for the _minusDeg_ (or viceversa)Goo
Minus Deg_minusDeg_Angle in degrees for deviation from _orientation. Default = 23. For selecting all vertical orientations give 359 for this input and 0 for the _plusDeg_ (or viceversa)Goo

Outputs

NameIDDescriptionType
OutreadMe!...String
Sel FacesselFacesSelected faces/surfacesGoo

Video Tutorials

Site design © Robin Rodricks.   Co-created by Andrew Heumann.   Ladybug and associated data © 2020 Ladybug Tools.  
Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.  Hosted by GitHub

Report an Issue  |  Terms of Service