Grasshopper Docs

Community documentation for Grasshopper add-ons & plugins

Color
Curve
Domain
List
Mesh
Number
Plane
Point
SubD
Surface
Transform
Twisted Box
Vector

Create a layered array of connected twisted boxes on a surface from a thickness and domain dividing parameters.

Inputs

NameIDDescriptionType
SurfaceSSurface to create twisted box array onSurface
ThicknessTOverall thickness of the twisted box array, offset from the surfaceNumber
Parameters UuDivision parameters along surface {u} domain ({u}0.0 = Surface start, {u}1.0 = Surface end) For best results {u} parameters should be between 0 and 1, in numerical order, and non duplicateNumber
Parameters VvDivision parameters along surface {v} domain ({v}0.0 = Surface start, {v}1.0 = Surface end) For best results {v} parameters should be between 0 and 1, in numerical order, and non duplicateNumber
Parameters WwDivision parameters along thickness {w} domain ({w}0.0 = Surface, {w}1.0 = Thickness) For best results {w} parameters should be between 0 and 1, in numerical order, and non duplicateNumber
RefitROptional Refit match method. (No Integer or 0 = Off, Integer greater than 0 = On and surface degree of refit) If an integer greater than zero, Refit match method is used if possible. When input surfaces are refit their control points are redistributed, added to, and removed from based on the surfaces curvature and the input integer degree, while trying to maintain their shapes. Refit results in tighter shaped twisted boxes, with curvature based control point distribution.Integer
Point SamplePOptional Point Sample match method. (No Integer or 0 = Off, Integer greater than 0 = On and amount of sample points) If an integer greater than zero, Point Sample match method is used. When input surfaces are sampled their control points are recreated by equally dividing the surface by the input integer point count. Point Sample results in looser shaped twisted boxes, with uniform control point distribution.Integer

Outputs

NameIDDescriptionType
Twisted BoxesTBResulting twisted box array on surfaceTwisted Box

Video Tutorials

Site design © Robin Rodricks.   Pufferfish and associated data © 2022 Michael Pryor.  
Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.  Hosted by GitHub

Report an Issue  |  Terms of Service