We need your help! 🔥
Please consider disabling your ad-blocker to support this website! 🔑
We are a free, community-supported website! 🥰
We only display small unobtrusive ads which help us stay online! 💯
Thank you in advance! ❤️
01 | Core
02 | Virtual Robot
03 | Virtual Tool
04 | Toolpath Utilities
05 | Utilities
06 | Online

Fusion 360 NC Import

Imports 5-Axis NC code from Fusion 360. Get the postprocessor by right-clicking the component and choosing the relevant option.

Inputs

NameIDDescriptionType
PathPATHPath towards NC fileString
Override Feed RateFEED OVERRIDEEnter a positive value (m/sec) to override the feeding rate (speed) defined in Fusion 360.Number
Tolerance: Points in Cartesian SpaceREDUCE PTTolerance similar to Reduce PolylineNumber
Tolerance: Angle ValuesREDUCE ANGChange in tool axis in radiansNumber
Rapid SpeedRAPIDRapid speed in m/secNumber
Orientation PointORIENTFusion provides 5-axis data. The orientation point defines the rotation of the tool around its axis. By default the X-axis of the plane will face away from the orientation point. So placing the orientation point close to the robot's base is usually a good place to start. If you want a static orientation, provide a very large vector with a length of > 50.000mmPoint
External AxisE01External Axis E01Number

Outputs

NameIDDescriptionType
KUKA|prc CommandsCMDSA series of KUKA|prc Commands (e.g. LINear, PTP, AXIS movements) that define the robot's toolpath.CommandData

Video Tutorials

Site design © Robin Rodricks.   Site co-created by Andrew Heumann.   KUKA Prc Pro and associated data © 2024 Johannes Braumann (Robots in Architecture).  
Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.  Hosted by GitHub

Report an Issue  |  Terms of Service