We need your help! 🔥
Please consider disabling your ad-blocker to support this website! 🔑
We are a free, community-supported website! 🥰
We only display small unobtrusive ads which help us stay online! 💯
Thank you in advance! ❤️
00 | Honeybee
01 | Daylight | Material
02 | Daylight | Light Source
03 | Daylight | Recipes
04 | Daylight | Daylight
05 | Energy | Building Program
06 | Energy | Material | Construction
07 | Energy | Schedule
08 | Energy | Set Zone Properties
09 | Energy | HVACSystems
10 | Energy | Energy
11 | THERM
12 | Developers
13 | WIP

Glare Analysis

Glare Analysis
This component is using evalglare for glare calculations. Evalgalare is developed by J. Wienold at Fraunhofer ISE.
http://www.ise.fraunhofer.de/en/
Check this link for more information about glare analysis. Thanks to Christoph Reinhart, Shelby Doyle, J Alstan Jakubiec and Rashida Mogri.
http://web.mit.edu/tito_/www/Projects/Glare/GlareRecommendationsForPractice.html

Inputs

NameIDDescriptionType
HDRImage Path_HDRImagePathPath to an HDR image fileGoo
Task Position UVtaskPositionUV_Task position in x and y coordinatesGoo
Task Position AngletaskPositionAngle_Task position opening angle in degreesGoo
Run It_runItSet to True to run the analysisGoo

Outputs

NameIDDescriptionType
Read MereadMe...Goo
Glare Check ImageglareCheckImagePath to HDR image of the glare studyGoo
DGPDGPDaylight glare probability. Goo
DGIDGIDaylight glare indexGoo
Glare Comfort RangeglareComfortRangeComfort Ranges. Imperceptible Glare [0.35 > DGP], Perceptible Glare [0.4 > DGP >= 0.35], Disturbing Glare [0.45 > DGP >= 0.4], Intolerable Glare [DGP >= 0.45] Goo
Image With Task AreaimageWithTaskAreaPath to HDR image with task area marked with blue circleGoo

Video Tutorials

Build A Wufi Passive Model In  With Honeybee 01 Honeybee Quickstart - Getting Started 02 Honeybee Quickstart - Defining Zones And Running A Simulation 03 Honeybee Quickstart - Visualizing Results 04 Honeybee Quickstart - Zone Attributes And Materials 05 Honeybee Quickstart - Internal Mass, Loads, Schedules 06 Honeybee Quickstart - Natural Ventilation And Hvac Systems Shade Analysis Using Honeybee: Shading Masks Shade Analysis Using Honeybee: Solar Access 01 Daylight Simulation Using Honeybee: Input Basics 02 Daylight Simulation Using Honeybee: Processing Simulation Results 03 Daylight Simulation Using Honeybee: Material Definitions 04 Daylight Simulation Using Honeybee: Electric Lighting Honeybee Workshop Part 1/7: What Is Honeybee, Introduction To Daylighting Simulation Honeybee Workshop Part 2/7: Getting Started With Honeybee For Daylighting Simulation Honeybee Workshop Part 3/7: Radiance's Skies And Materials Honeybee Workshop Part 4/7: Set Up Daylighting Analysis Fo A Single Room Honeybee Workshop Part 5/7: Iterative Runs Using Honeybee Honeybee Workshop Part 6/7: Rsults Visualization For Daylight Simulation Honeybee Workshop Part 7/7: Annual Daylight Simulation Air Cavity Temperature - Ladybug + Honeybee Ladybug + Honeybee Solar Parti Honeybee Indoor Mrt Map - Clip 0 - Honeybee Energy Modeling - Introduction 1 - Honeybee Energy Modeling - Installation 2 - Honeybee Energy Modeling- Hb Zones From Masses Part1: Mass2zones 3 - Honeybee Energy Modeling - Hbzones From Masses Part 2: Label Zone Attributes 6 - Honeybee Energy Modeling - Running A Basic Energy Simulation 8 - Honeybee Energy Modeling - Importing And Visualizing Surface Level Results 4 - Honeybee Energy Modeling - Hbzones From Masses Part 3: Solve Adjacencies 7 - Honeybee Energy Modeling - Importing And Visualizing Zone Level Results 5 - Honeybee Energy Modeling - Hbzones From Masses Part 4: Glazing By Ratio 9 - Honeybee Energy Modeling - The Laws Of Geometry In E+ Part 1: Adjacent Surfaces 10 - Honeybee Energy Modeling - The Laws Of Geometry In E+ Part 2: Core+perimeter Zoning 12 - Honeybee Energy Modeling - Creating Zones From Surfaces Part 1: Createhbsrfs 11 - Honeybee Energy Modeling - The Laws Of Geometry In E+ Part 3: Curved Geometry 13 - Honeybee Energy Modeling - Creating Zones From Surfaces Part 2: Addhbglz 14 - Honeybee Energy Modeling - Creating Zones From Surfaces Part 3: Createhbzones 15 - Honeybee Energy Modeling - Constructions Part 1: How To Change Constructions 16 - Honeybee Energy Modeling - Constructions Part 2: Dissecting/decomposing Constructions 17 - Honeybee Energy Modeling - Constructions Part 3: Making Custom Constructions 19 - Honeybee Energy Modeling - Changing Zone Loads (lighting/equip/people/etc) 18 - Honeybee Energy Modeling - Constructions Part 4: Making Custom Materials 20 - Honeybee Energy Modeling - Schedules Part 1: How To Visualize Schedules 21 - Honeybee Energy Modeling - Schedules Part 2: Making Custom Schedules 22 - Honeybee Energy Modeling - Changing Zone Setpoints /setbacks 23 - Honeybee Energy Modeling - Adding Context Shading With Transparency Schedules Apply Openstudio Measure To Honeybee Energy Model Setting Up Daylight Analysis From Rhino Using Honeybee And Human Ui Setting Up Daylight Analysis From Rhino Using Honeybee And Human Ui
Build A Wufi Passive Model In With Honeybee

Site design © Robin Rodricks.   Site co-created by Andrew Heumann.   Honeybee and associated data © 2024 Ladybug Tools.  
Rhinoceros and Grasshopper are registered trademarks of Robert McNeel & Associates.  Hosted by GitHub

Report an Issue  |  Terms of Service